The Bomber Z1 Coil 29″ Boost suspension fork by Marzocchi offers legendary ride quality in a modern chassis
With the Bomber Z1 Coil, Marzocchi offers a suspension fork with a specially hardened, super-light silicon-chromium steel spring. The preload of the spring is done by the top cap and is purely there to adapt the sag (negative spring travel) to the rider’s weight, but has no influence on the spring rate. In addition to the typical M-crown design, the fork offers a stanchion tube diameter of 36 mm, a travel of 150 mm to 170 mm and Grip damping with adjustable compression and rebound. All forks are supplied with a medium coil.
Specifications:
- Application:
- All Mountain, Enduro
- Wheel Size:
- 29″
- Suspension Type:
- steel coil
- Travel:
- 160 mm, 170 mm
- Steerer Tube:
- 1 1/8″ – 1.5″ tapered
- Axle Type:
- thru-axle with quick release lever (15 x 110 mm)
- Brake Mount:
- disc PM 7″ (direct mount 180 mm)
Technical Information:
- Offset:
- 44 mm
- Steerer Tube Length:
- 263 mm
- Steerer Tube Diameter (Stem):
- 28.6 mm
- Steerer Tube Diameter (Crown Race):
- 40 mm
- Axle to Crown:
- 567.1 mm (at 160 mm), 577.1 mm (at 170 mm)
- Over Locknut Dimension:
- 110 mm
- Stanchion Tube Diameter:
- 36 mm
- Steerer Tube Material:
- aluminium
- Crown Material:
- aluminium
- Stanchion Tube Material:
- aluminium
- Lower Tube Material:
- magnesium
- Dropout Material:
- aluminium
Adjustment Options:
- Compression:
- 2-position Sweep Adjust (Open, Firm)
- Rebound:
- yes
- Suspension Stiffness:
- steel coil adjust
- Remote:
- no
- Travel Adjustment:
- no
Approved For:
- Tyre Size (max.):
- 29 x 2.5″ , 27.5 x 3.0″
- Note:
- From a tyre size of 29 x 2.5″ or 27.5 x 3.0″ the tyre clearance must be checked with the fork fully compressed. It should be at least 8 mm measured from the fork crown.
- Rotor Size (max.):
- 203 mm
